Solenoid Pick Up - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.3.10 SOLENOID PICK UP

REMOVAL
1. Remove COVER ASSY RH. (p.301)
2. Remove COVER ASSY LH. (p.295)
3. Remove COVER MSI. (p.291)
4. Remove COVER FRONT L and COVER FRONT ASSY U.
5. Remove FRAME ASSY-PH. (p.327)
6. Remove MSI ASSY. (p.304)
7. Unhook the hook on GEAR PICK UP fastened to SHAFT ASSY MSI from MSI
ASSY, and remove GEAR PICK UP.
When performing the following work, leave the intermediate
C A U T I O N
connector on the harness side.
8. Disconnect connector (P/J605) from SOLENOID PICK UP, and remove the
harness from the groove on MSI ASSY.
9. Remove the screw (silver, tapping, 8mm) fastening SOLENOID PICK UP to MSI
ASSY.
10. Remove SOLENOID PICK UP from MSI ASSY.
DISASSEMBLY AND ASSEMBLY
(p.292)
[3)]
MSI
10)
9)
Groove
Notch
Figure 4-36. Removal of SOLENOID PICK UP
Revision B
7)-1
8)
7)-2
Leg_Sec03_050FA
319