Cover Top Side L - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.2.4 COVER TOP SIDE L

REMOVAL
1. In the case of the DUPLEX specification, open DUPLEX ASSY.
2. In the case of the standard specification, open COVER FUSER.
3. Open COVER ASSY TOP.
4. Loosen the screw (silver, with flange, 8 mm) fastening COVER TOP SIDE L to
the main unit.
The screw fastening COVER TOP SIDE L is designed not to come
C A U T I O N
loose from COVER TOP SIDE L.
5. Remove COVER TOP SIDE L from the main unit.
REINSTALLATION
1. Match the hole on COVER TOP SIDE L with the boss on the main unit.
2. Fasten COVER TOP SIDE L to the main unit with the screw (silver, with flange, 8
mm).
3. Close COVER ASSY TOP.
4. In the case of the standard specification, close COVER FUSER.
5. In the case of the DUPLEX specification, close DUPLEX ASSY.
DISASSEMBLY AND ASSEMBLY
(p.285)
(p.285)
COVER
4)
Figure 4-6. Removal of COVER TOP SIDE L
Revision B
5)
Leg_Sec03_502EA
286