Epson AcuLaser C1100 Service Manual page 312

EPSON AcuLaser C1100
REINSTALLATION
1. Match the left side of PLATE BOTTOM ASSY MSI with the attachment position
on the left side of MSI ASSY, and insert the right side of PLATE BOTTOM
ASSY MSI from the notch on the right side of MSI ASSY.
When performing the following work, work can be performed more
C H E C K
P O I N T easily by slightly lifting up the rear of PLATE BOTTOM ASSY
MSI.
2. Insert the left and right holes of PLATE BOTTOM ASSY MSI into the shafts on
the left and right of MSI ASSY, and attach PLATE BOTTOM ASSY MSI.
3. Insert the holes of PLATE BOTTOM 2 into the boss on PLATE BOTTOM ASSY
MSI to attach while extending the left and right attachment sections of PLATE
BOTTOM 2.
4. Attach ROLL ASSY MSI. (p.306)
5. Attach SOLENOID PICK UP. (p.319)
6. Attach MSI ASSY. (p.304)
7. Attach FRAME ASSY-PH. (p.327)
8. Attach COVER FRONT L and COVER FRONT ASSY U.
9. Attach COVER MSI. (p.291)
10. Attach COVER ASSY LH. (p.295)
11. Attach COVER ASSY RH. (p.301)
DISASSEMBLY AND ASSEMBLY
(p.292)
MSI
Revision B
312