Epson AcuLaser C1100 Service Manual page 425

EPSON AcuLaser C1100
3. Connect connector (P/J612) of MOTOR ASSY DUP INV to BRACKET-MOTO
INV.
When performing the following work, take care to prevent the
C A U T I O N
harness from being sandwiched between DUPLEX ASSY and
BRACKET-MOTO INV.
4. Match the hole on BRACKET-MOTO INV with the shaft on DUPLEX ASSY,
and attach together with MOTOR ASSY DUP INV.
5. Fasten BRACKET-MOTO INV to DUPLEX ASSY with the 4 screws (silver, with
flange, tapping, 10mm).
6. Attach COVER-L DUP. (p.414)
7. Attach DUPLEX ASSY. (p.412)
DISASSEMBLY AND ASSEMBLY DUPLEX
Revision B
425