Pwba Mot - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.13.11 PWBA MOT

Avoid staticky places such as on a carpet especially when removing
C A U T I O N
or inserting a Board. Before starting work with the Board, make
sure to touch metallic portion of the printer connected to the earth
to let your body come out free of static electricity.
REMOVAL
1. Remove COVER LEFT 500. (p.453)
2. Disconnect connector (P/J440) and connector (P/J446) from PWBA MOT.
3. Remove the 3 screws (silver, with flange, 6 mm) fastening PWBA MOT to 500
PAPER FEEDER ASSY.
4. Remove PWBA MOT from 500 PAPER FEEDER ASSY.
REINSTALLATION
1. Match the notch at the bottom right of PWBA MOT with the protrusion on 500
PAPER FEEDER ASSY to attach.
2. Fasten PWBA MOT to 500 PAPER FEEDER ASSY with the 3 screws (silver,
with flange, 6 mm).
3. Connect connector (P/J440) and connector (P/J446) to PWBA MOT.
4. Attach COVER LEFT 500. (p.453)
Table 4-13. Symptoms when the connector is loose
Connector
Panel Indication Symptom
No.
P/J446 Jam LC, G FEEDER Jam
DISASSEMBLY AND ASSEMBLY
Error Caused by Connector
Disconnection
---
500 PAPER CASSETTE & 500 PAPER FEEDER
4)
3)
3)
3)
Figure 4-157. Removal of PWBA MOT
Revision B
Leg_Sec03_029EA
457