Cap-Plate Pr, Plate-Assy Pr - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.6.7 CAP-PLATE PR, PLATE-ASSY PR

REMOVAL
1. Remove COVER ASSY RH. (p.301)
2. Remove 2ND BTR ASSY. (p.348)
3. Remove FRAME ASSY-PH. (p.327)
4. Remove BCR CLN XERO ASSY.
5. Remove SENSOR TR-0. (p.361)
6. Remove GUIDE CRU ASSY AD.
7. Remove LEVER-LATCH PR. (p.370)
8. Turn PLATE-ASSY PR in the direction of the arrow, match the notch on PLATE-
ASSY PR with the protrusion on GUIDE CRU ASSY AD, and remove PLATE-
ASSY PR together with CAP-PLATE PR.
9. Unhook the hook on CAP-PLATE PR, and remove CAP-PLATE PR from
PLATE-ASSY PR.
REINSTALLATION
When performing the following work, pay attention to the
C A U T I O N
attachment direction of CAP-PLATE PR.
1. Attach CAP-PLATE PR to PLATE-ASSY PR.
2. Match the notch on PLATE-ASSY PR with the protrusion on GUIDE CRU ASSY
AD, and attach PLATE-ASSY PR together with CAP-PLATE PR.
3. Attach LEVER-LATCH PR. (p.370)
4. Attach GUIDE CRU ASSY AD.
5. Attach SENSOR TR-0. (p.361)
6. Attach BCR CLN XERO ASSY.
7. Attach FRAME ASSY-PH. (p.327)
8. Attach 2ND BTR ASSY. (p.348)
9. Attach COVER ASSY RH. (p.301)
DISASSEMBLY AND ASSEMBLY
(p.373)
(p.367)
(p.367)
(p.373)
Figure 4-82. Removal of CAP-PLATE PR and PLATE-ASSY PR
XERO
Revision B
9)-2
9)-1
8)
Leg_Sec03_203FA
371