Switch Assy Front - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.2.7 SWITCH ASSY FRONT

REMOVAL
1. Remove COVER ASSY RH. (p.301)
2. Unclamp the clamp fastening the harness of SWITCH ASSY FRONT and remove
the harness.
3. Remove the screw (silver, with flange, 8 mm) fastening SWITCH ASSY FRONT
to the main unit.
4. Remove SWITCH ASSY FRONT from the main unit.
When performing the following work, leave the intermediate
C A U T I O N
connector (white) on the harness side.
5. Disconnect connector (P/J115, white) and connector (P/J125) from SWITCH
ASSY FRONT.
REINSTALLATION
1. Connect connector (P/J115, white) and connector (P/J125) to SWITCH ASSY
FRONT.
2. Match the hole on SWITCH ASSY FRONT with the boss on the main unit.
3. Fasten SWITCH ASSY FRONT to the main unit with the screw (silver, with
flange, 8 mm).
4. Fasten the harness of SWITCH ASSY FRONT with the clamp.
5. Attach COVER ASSY RH. (p.301)
DISASSEMBLY AND ASSEMBLY
Intermediate connector
4)
3)
Figure 4-9. Removal of SWITCH ASSY FRONT
COVER
(white)
5)
2)
5)
(White)
Revision B
Leg_Sec03_504EC
289