Pwba Tray 500 - Epson AcuLaser C1100 Service Manual

EPSON AcuLaser C1100

4.13.10 PWBA TRAY 500

Avoid staticky places such as on a carpet especially when removing
C A U T I O N
or inserting a Board. Before starting work with the Board, make
sure to touch metallic portion of the printer connected to the earth
to let your body come out free of static electricity.
REMOVAL
1. Remove COVER LEFT 500. (p.453)
2. Disconnect connector (P/J435), connector (P/J436) and connector (P/J437) from
PWBA TRAY 500.
3. Remove the 3 screws (silver, with flange, 6 mm) fastening PWBA TRAY 500 to
500 PAPER FEEDER ASSY.
4. Remove PWBA TRAY 500 from 500 PAPER FEEDER ASSY.
REINSTALLATION
1. Match the notch at the bottom right of PWBA TRAY 500 with the protrusion on
500 PAPER FEEDER ASSY to attach.
2. Fasten PWBA TRAY 500 to 500 PAPER FEEDER ASSY with the 3 screws
(silver, with flange, 6 mm).
3. Connect connector (P/J435), connector (P/J436) and connector (P/J437) to PWBA
TRAY 500.
4. Attach COVER LEFT 500. (p.453)
Table 4-12. Symptoms when the connector is loose
Connector
Panel Indication Symptom
No.
Printing is not
P/J435 Service Req E547
possible.
Printing is not
P/J437 G Open
possible.
DISASSEMBLY AND ASSEMBLY
Error Caused by Connector
Disconnection
Paper Feeder cannot be detected.
Paper Feeder Rear Cover is open.
500 PAPER CASSETTE & 500 PAPER FEEDER
3)
4)
3)
3)
Figure 4-156. Removal of PWBA TRAY 500
Revision B
Leg_Sec03_030EA
456