Star Wheel Holder Assy - Epson Stylus C110 Service Manual

EPSON Stylus C110/C120/D120
After replacing the Front Frame, be sure to attach an acetate
tape referring to the figure below.
18mm
When installing the Front Frame, pay attention to the
following instructions.
• As shown in
with the hook (x1) and the cutouts (x2).
As shown in
•
Frame together with the screw. (Place the Right Frame on top
of the Front Frame.)
When attaching the ferrite core, align its edge with the
reference line marked on the Front Frame, then secure the core
with double-sided tape.
DISASSEMBLY/ASSEMBLY
Downloaded from www.Manualslib.com
10mm
Figure 4-38. Acetate Tape Position
Figure 4-37, be sure to secure the Front Frame
Figure 4-36, secure the Front Frame and Right
Ferrite core Position
Reference Line
Figure 4-39. Attaching Ferrite Core
manuals search engine

4.5.6 Star Wheel Holder Assy.

Part/Unit that should be removed before removing Star Wheel Holder Assy.
Upper Housing/Lower Housing/Main Board Unit/Left Frame/Panel Unit
Removal Procedure
1. Remove the Grounding Spring from the Star Wheel Holder Assy.
2. Remove the screws (x2) that secure the Star Wheel Holder Assy, and remove it.
Disassembling Printer Mechanism
Star Wheel Holder Assy.
Grounding Spring
C.B.P. 3x8, F/Zn-3C (6±1kgfcm)
Figure 4-40. Removing Star Wheel Holder Assy.
Revision B
88