EPSON AcuLaser C1100
4.4.10 ACTUATOR-REGI
Step numbers with [ ] in the figure indicate the step of
C A U T I O N
reinstallation.
REMOVAL
1.
Remove FRAME ASSY-PH.
(p.327)
2.
Remove the left-side shaft on ACTUATOR-REGI from the hook on FRAME
ASSY-PH.
3.
Draw out the right-side shaft on ACTUATOR-REGI from the hole on FRAME
ASSY-PH, and remove ACTUATOR-REGI together with SPRING-ACTUATOR.
4.
Remove SPRING-ACTUATOR from ACTUATOR-REGI.
REINSTALLATION
1.
Attach SPRING-ACTUATOR to ACTUATOR-REGI.
2.
Insert the right-side shaft on ACTUATOR-REGI into the hole on FRAME ASSY-
PH, and hook SPRING-ACTUATOR onto the notch on FRAME ASSY-PH.
SPRING-ACTUATOR must be hooked firmly on ACTUATOR-
C A U T I O N
REGI and FRAME ASSY-PH.
3.
Fasten the left-side shaft on ACTUATOR-REGI by the hook on FRAME ASSY-
PH.
4.
Attach FRAME ASSY-PH.
(p.327)
DISASSEMBLY AND ASSEMBLY
2)
Figure 4-51. Removal of ACTUATOR-REGI
PH ASSY
CAUTION
3)
4)
[3)]
Leg_Sec03_064FA
Revision B
335