Configuring Dhcp Client - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Step Command
1
ZXR10(config-if-vlanX)#
2
ZXR10(config-if-vlanX)#
trust
Step Command
1
ZXR10(config)#
2
ZXR10(config)#
enable
Command
ZXR10(config-if-vlanX)#
| hex}
Step Command
1
ZXR10(config-if-vlanX)#
2
ZXR10(config-if-vlanX)#
Command
ZXR10(config-if-vlanX)#
98 Confidential and Proprietary Information of ZTE CORPORATION
ip dhcp relay snooping trust
no ip dhcp relay snooping
13. To enable DHCP Relay Snooping Trust or disable DHCP Relay
Snooping Trust, use the following command.
ip dhcp relay snooping trust enable
no ip dhcp relay snooping trust

Configuring DHCP Client

1. To enable class-id of dhcp client on the interface, use the fol-
lowing command.
ip dhcp client class-id {WORD
2. This configures class-id of dhcp client on the interface.
ip dhcp client client-id
no ip dhcp client client-id
3. To configure hostname of dhcp client on the interface, use the
following command.
ip dhcp client hostname WORD
4. To configure lease information of dhcp client on the interface,
use the following command.
Function
This enables the interface as
DHCP Relay trust.
This disables the interface as
DHCP Relay trust.
Function
This enables DHCP Relay
Snooping Trust.
This disables DHCP Relay
Snooping function.
Function
This enables class-id of dhcp
client on the interface.
Function
This configures dhcp client-id
on the interface.
This cancels the configuration
of dhcp client-id on the
interface.
Function
This configures hostname of
dhcp client on the interface.