Show Ip Igmp Interface; Show Ip Igmp Packet-Count - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Multicast)
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Example
Purpose
Command Modes
Syntax
Syntax
Description
Example
16 Confidential and Proprietary Information of ZTE CORPORATION
ip igmp static-group
show ip igmp groups

show ip igmp interface

Use this command to display multicast-related information about
an interface.
All modes except user EXEC
show ip igmp interface [<interface-name>]
<interface-name>
This example describes how to display multicast-related informa-
tion about the interface fei_1/1.
ZXR10#show ip igmp interface
fei_1/1
Internet address is 102.1.1.3, subnet mask is 255.0.0.0
IGMP is enabled on interface
Current IGMP version is 2
IGMP query interval is 125 seconds
IGMP last member query interval is 1 seconds
IGMP query max response time is 10 seconds
IGMP querier timeout period is 251 seconds
IGMP querier is 102.1.1.3, never expire
Inbound IGMP access group is not set
IGMP immediate leave control is not set

show ip igmp packet-count

Use this command to show statistics count of IGMP packets re-
ceived/sent.
All modes except user EXEC
show ip igmp packet-count [<interface-name>]
<interface-name>
This example describes how to show statistics count of IGMP pack-
ets received/sent on all interfaces.
ZXR10#show ip igmp packet-count
Received IGMP Packets Count
Interface Query ReportV2
fei_1/1 0 0
fei_1/3 0 99
Summary 0 99
Send IGMP Packets Count
Interface Query
fei_1/1 2
fei_1/3 1
Summary 3
Interface name
Interface name
Leave ReportV1 Others
0 0 0
7 0 11
7 0 11
Spec-Query Total
0 2
0 1
0 3
Total
0
117
117