Fast Activation Procedure; Obtain Unit Serial Number; View Currently Installed Features - Comtech EF Data CDM-710 Installation And Operation Manual

CDM-710 Broadcast Satellite Modem

FAST Activation Procedure

C.2 FAST Activation Procedure
C.2.1

Obtain Unit Serial Number

Obtain the modem serial number as follows:
a) From the front panel
b) The modem motherboard Serial Number is displayed on the bottom line, to the left:
c) Record serial number:
C.2.2

View currently installed features

To view the currently installed features, proceed as follows:
a) From the
b) Scroll through the modem Options using the ▲▼ arrow keys, and note which options are
'Installed' or 'Not Installed'. Any that are 'Not Installed' may be
purchased as a FAST upgrade:
Note the following (this listing is representative and is subject to change):
Option Number (top line)
(main) menu, select
SELECT:
FAST: Cnfg View
MainBoard S/N: 333333333
menu, select
UTILITY FAST
View Options: 01 (
IF Modulator Installed
Description (bottom line)
01 IF Modulator (for CDM-710 70/140 MHz units)
L-Band Mod (for CDM-710L L-Band units)
02 IF Demodulator (for CDM-710 70/140 MHz units)
L-Band Demod (for CDM-710L L-Band units)
03
FEC Slot 1
04
FEC Slot 2
05 Interface #1
06 GBEI Intf2
07 Tx QPSK
08 Tx 8PSK
09 Tx 16-QAM
10
Tx 16APSK
11
Tx 32 APSK
12
Rx QPSK
13
Rx 8PSK
14
Rx 16QAM
15 Rx 16APSK
16 Rx 32 APSK
17 Tx <=15.0 MS
18 Tx <=22.5 MS
19 Tx <=30.0 MS
UTILITY
________
, then press [ENTER].
VIEW
)
C–2
Revision 11
MN/CDM710G.IOM
then press [ENTER].
FAST,