CDM-710 Broadcast Satellite Modem
Ethernet Management
6.5.4.2.2
Admin | Remote Page
The 'Admin | Remote' page (Figure 6-5) sets and returns administration information for the
CDM-710 Simple Network Management Protocol (SNMP) feature.
The Administrator can assign up to two SNMP Trap IP addresses.
The Administrator can assign a SNMP Trap Community String. The factory default for this
parameter is public. The SNMP Trap Community String field can be any combination of characters
and a length of 0 - 20 characters.
For details pertaining to the configuration parameters available on this page, refer to Chapter 5.
FRONT PANEL OPERATION and Sect. 6.3 SNMP INTERFACE.
Once the desired configuration settings have been made on this page, the user should then click
[Submit Admin] to save these changes.
Figure 6-5. Admin | Remote page
6–15
Revision 11
MN/CDM710.IOM
Need help?
Do you have a question about the CDM-710 and is the answer not in the manual?
Questions and answers