Comtech EF Data CDM-710 Installation And Operation Manual page 126

CDM-710 Broadcast Satellite Modem
Ethernet Management
response (for example, FRW? response) will be displayed as one line, with the latter lines overwriting
the previous lines.
In order to view the full response messages, CEFD recommends using HyperTerminal configured
as Telnet Client. To do so, configure HyperTerminal as follows:
1. Ensure that connection is made
using
instead of COM1 or COM2, as
shown in the example to the near
right.
2. ASCII Setup (File
Settings
Check the "Send line ends with
line feeds" option in the ASCII
Sending
"Append
incoming line ends" option in
the ASCII Receiving section, as
shown in the example to the far
right.
Login and remote command execution via HyperTerminal configured as Telnet Client appears as
per the following examples:
TCP/IP (Winsock)
Properties
ASCII Setup):
section and the
line feeds to
6–6
Revision 11
MN/CDM710.IOM