5.6.2
Configuring the Application Settings
The 'Application Settings' screen is used for configuring various application parameters
(e.g., for Telnet).
To configure the Application Settings parameters, take these 4
steps:
1.
Open the 'Application Settings' screen (Advanced Configuration menu > Network
Settings > Application Settings option).
2.
Configure the Application Settings according to the table below.
3.
Click the Submit button to save your changes.
4.
To save the changes to flash memory, refer to 'Saving Configuration' on page 278.
SIP User's Manual
Figure 5-38: Application Settings Screen
182
Mediant 1000
Document #: LTRT-83302