3.3.1.1
Configuring Application Settings
The 'Application Settings' page is used for configuring various application parameters such
as Network Time Protocol (NTP), daylight saving time, and Network File System (NFS). For
a description of these parameters, see ''Configuration Parameters Reference'' on page
333.
To configure application settings:
1.
Open the 'Application Settings' page (Configuration tab > System menu >
Application Settings).
2.
Configure the parameters as required.
3.
For configuring NFS, under the 'NFS Settings' group, click the NFS Table
the 'NFS Settings' page appears. For a description of configuring this page, see
''Configuring NFS Settings'' on page 59.
4.
Click the Submit button to save your changes.
5.
To save the changes to flash memory, see ''Saving Configuration'' on page 169.
SIP User's Manual
Figure 3-33: Application Settings Page
58
MediaPack Series
button;
Document #: LTRT-65415