Stopping The Playing Of An Announcement - AudioCodes Mediant 600 User Manual

sent.
An example is shown below of an MSCML <PlayRecord> Request:
<?xml version="1.0" encoding="utf-8"?>
<MediaServerControl version="1.0">
Recurl=nfs://10.11.12.13/save/recordings/11.wav>
value="20041210"/>
</MediaServerControl>
An example is shown below of an MSCML <PlayRecord> Response:
<?xml version="1.0" encoding="utf-8"?>
<MediaServerControl version="1.0">
text="OK" reclength="15005">
</MediaServerControl>

12.2.2.6 Stopping the Playing of an Announcement

The Application server issues a <stop> request when it requires that the device stops a
request in progress and not initiate another operation. The only (optional) request-specific
parameter is id.
The device refers to a SIP re-INVITE message with hold media (c=0.0.0.0) as an implicit
<Stop> request. The device immediately terminates the request in progress and sends a
response.
An example is shown below of an MSCML <Stop> Request:
<?xml version="1.0" encoding="utf-8"?>
<MediaServerControl version="1.0">
</MediaServerControl>
12.2.2.7 Relevant Parameters
The following parameters (described in ''IP Media Parameters'' on page 719) are used to
configure the MSCML:

AmsProfile = 1 (mandatory)

AASPackagesProfile = 3 (mandatory)

VoiceStreamUploadMethod = 1 (mandatory)

EnableVoiceStreaming = 1 (mandatory)
SIP User's Manual
<request>
<playrecord id="75899" barge="NO"
<prompt>
</prompt>
</playrecord>
</request>
<response request="playrecord" id="75899" code="200"
</response>
<request>
<stop id="123">
</stop>
</request>
<audio url="nfs://100.101.102.103/45">
<variable type="date" subtype="mdy"
462
Mediant 600 & Mediant 1000
Document #: LTRT-83308