4.4.11 Number Manipulation And Routing Parameters; Table 4-11: Number Manipulation And Routing Parameters - AudioCodes MediaPack MP-124 User Manual

4.4.11 Number Manipulation and Routing Parameters

Table 4-11: Number Manipulation and Routing Parameters

ini File Parameter
TrunkGroup
DefaultNumber
ChannelSelectMode
SIP User's Manual
This ini file table parameter defines the device's endpoints. Alternatively,
you can use the Web interface (refer to "Configuring the Endpoint
Phone Numbers" on page 179). The format of this parameter is shown
below:
[TrunkGroup]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum,
TrunkGroup_FirstTrunkId, TrunkGroup_LastTrunkId,
TrunkGroup_FirstBChannel, TrunkGroup_LastBChannel,
TrunkGroup_FirstPhoneNumber, TrunkGroup_ProfileId,
TrunkGroup_Module;
[\TrunkGroup]
Where,
TrunkGroupNum = Hunt Group ID (1 to 99)
FirstTrunkId = Starting physical trunk number, where 0 is the first
trunk (N/A)
FirstBChannel = Starting channel (from 1)
LastBChannel = Ending channel (up to 31)
FirstPhoneNumber = Phone number associated with the first
channel (optional)
ProfileId = Optional Tel Profile ID (1 to 9) applied to the group of
channels
LastTrunkId = Ending physical trunk number (N/A)
Module = Module number (N/A)
For example:
[TrunkGroup]
TrunkGroup 4 = 3, 0, 0, 1, 4, 101, 0, 1; (4 channels)
TrunkGroup 4 = 3, 0, 0, 5, 8, 201, 0, 0; (4 channels)
[\TrunkGroup]
Notes:
This parameter can appear up to 8 times for 8-port devices and up
to 24 times for MP-124 devices.
For a description on ini file table parameters, refer to ''Structure of
ini File Table Parameters'' on page 229.
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page 123.
For a description of this parameter, refer to ''SIP General Parameters''
on page 100.
286
Description
Document #: LTRT-65410
MediaPack Series