Hunt Groups, Number Manipulation And Routing Parameters - AudioCodes Mediant 800 MSBG User Manual

12.12.13

Hunt Groups, Number Manipulation and Routing Parameters

This subsection describes the device's number manipulation and routing parameters.
12.12.13.1 Hunt Groups and Routing Parameters
The routing parameters are described in the table below.
Parameter
Web: Hunt Group Table
EMS: SIP Endpoints > Phones
[TrunkGroup]
Web: Hunt Group Settings
EMS: SIP Routing > Hunt Group
[TrunkGroupSettings]
SIP User's Manual
Table 12-63: Routing Parameters
This ini file table parameter is used to define and activate the
device's endpointsTrunk channels, by defining telephone
numbers and assigning them to Hunt Groups. The format of this
parameter is shown below:
[TrunkGroup]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum,
TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel,
TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber,
TrunkGroup_ProfileId, TrunkGroup_LastTrunkId,
TrunkGroup_Module;
[\TrunkGroup]
For example, the configuration below assigns BRI channels 1
through 4 of Module 2 to Hunt Group ID 2 with phone numbers
208 to 211:
TrunkGroup 1 = 2, 0, 1, 4, 208, 0, 0 ,2;
Notes:
The first entry in this table starts at index 0.
Hunt Group ID 1 is depicted as 0 in the table.
This parameter can appear up to four times per module.
For configuring this table in the Web interface, see
Configuring Hunt Group Table on page 146.
For a description of ini file table parameters, see ''Configuring
ini File Table Parameters'' on page 368.
This ini file table parameter defines rules for channel allocation
per Hunt Group. If no rule exists, the rule defined by the global
parameter ChannelSelectMode takes effect. The format of this
parameter is as follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,TrunkGroupSettings_Conta
ctUser, TrunkGroupSettings_ServingIPGroup,
TrunkGroupSettings_MWIInterrogationType;
[\TrunkGroupSettings]
836
Mediant 800 MSBG
Description
Document #: LTRT-12804