Toolbar Description - AudioCodes Mediant 800B User Manual

6.1.4

Toolbar Description

The toolbar provides frequently required command buttons, described in the table below:
Icon Button
Submit
Device
Actions
Log off
-
User's Manual
Table 6-2: Description of Toolbar Buttons
Name
Applies parameter settings to the device (see ''Saving Configuration''
on page 626).
Note: This icon is grayed out when not applicable to the currently
opened page.
Burn Saves parameter settings to flash memory (see ''Saving
Configuration'' on page 626).
Opens a drop-down list with frequently needed commands:

Load Configuration File: Opens the Configuration File page for
loading an ini file to the device (see ''Backing Up and Loading
Configuration File'' on page 669).

Save Configuration File: Opens the Configuration File page for
saving the ini file to a folder on your PC (see ''Backing Up and
Loading Configuration File'' on page 669).

Reset: Opens the Maintenance Actions page for performing
various maintenance procedures such as resetting the device
(see ''Resetting the Device'' on page 623).

Software Upgrade Wizard: Starts the Software Upgrade Wizard
for upgrading the device's software (see ''Software Upgrade
Wizard'' on page 663).

Switch Over: Opens the High Availability Maintenance page for
switching between Active and Redundant devices (see High
Availability Maintenance on page 627).

Reset Redundant: Opens the High Availability Maintenance page
for resetting the Redundant device (see High Availability
Maintenance on page 627).
Home Opens the Home page (see ''Viewing the Home Page'' on page 56).
Help Opens the Online Help topic of the currently opened configuration
page (see ''Getting Help'' on page 55).
Logs off a session with the Web interface (see ''Logging Off the Web
Interface'' on page 56).
Reset
If you modify a parameter on a page that takes effect only after a
device reset, after you click the Submit button, the toolbar displays
"Reset". This is a reminder that you need to later save your settings
to flash memory and reset the device.
Mediant 800B Gateway and E-SBC
Description
44 Document #: LTRT-10620