Toolbar; Figure 3-3: "Reset" Displayed On Toolbar; Table 3-1: Description Of Toolbar Buttons - AudioCodes mediapack MP-500 User Manual

SIP User's Manual
3.2.4

Toolbar

The toolbar provides command buttons for quick-and-easy access to frequently required
commands, as described in the table below:
Icon
Actions
Note:
Version 5.8

Table 3-1: Description of Toolbar Buttons

Button
Name
Submit Applies parameter settings to the device (refer to ''Saving
Configuration'' on page 237).
Note: This icon is grayed out when not applicable to the currently
opened page.
Burn Saves parameter settings to flash memory (refer to ''Saving
Configuration'' on page 237).
Device Opens a drop-down menu list with frequently needed commands:
Load Configuration File: opens the 'Configuration File' page for
loading an ini file (refer to ''Backing Up and Restoring
Configuration'' on page 244).
Save Configuration File: opens the 'Configuration File' page for
saving the ini file to a PC (refer to ''Backing Up and Restoring
Configuration'' on page 244).
Reset: opens the 'Maintenance Actions' page for resetting the
device (refer to ''Resetting the Device'' on page 235).
Software Upgrade Wizard: opens the 'Software Upgrade Wizard'
page for upgrading the device's software (refer to ''Software
Upgrade Wizard'' on page 240).
Home Opens the 'Home' page (refer to ''Using the Home Page'' on page
54).
Help Opens the Online Help topic of the currently opened configuration
page in the Work pane (refer to ''Getting Help'' on page 51).
Log off Logs off a session with the Web interface (refer to ''Logging Off the
Web Interface'' on page 52).
If you modify parameters that take effect only after a device reset, after you
click the Submit button, the toolbar displays the word "Reset" (in red color),
as shown in the figure below. This is a reminder to later save ('burn') your
settings to flash memory and reset the device.

Figure 3-3: "Reset" Displayed on Toolbar

Description
29
3. Web-Based Management
October 2009