3.4.1.1
Configuring the Management Settings
The 'Management Settings' page allows you to configure the device's management
parameters. For detailed description on the SNMP parameters, refer to ''SNMP
Parameters''
To configure the management parameters:
1.
Open the 'Management Settings' page (Management tab > Management
Configuration menu > Management Settings
2.
Configure the management parameters.
3.
Configure the following SNMP tables:
•
SNMP Trap Destinations: Click the arrow
destinations (refer to ''Configuring the SNMP Trap Destinations Table'' on page
191).
•
SNMP Community String: Click the arrow
community strings (refer to ''Configuring the SNMP Community Strings'' on page
192).
SIP User's Manual
on page
281
.
Figure 3-114: Management Settings Page
page item).
button to configure the SNMP trap
button to configure the SNMP
190
Mediant 600 & Mediant 1000
Document #: LTRT-83306