SIP User's Manual
An example of an IKE Table is shown below:
[IPSec_IKEDB_Table]
Format IKE_DB_INDEX = IKEPolicySharedKey,
IKEPolicyProposalEncryption_0, IKEPolicypRoposalAuthentication_0,
IKEPolicyProposalDHGroup_0, IKEPolicyProposalEncryption_1,
IKEPolicypRoposalAuthentication_1, IKEPolicyProposalDHGroup_1,
IKEPolicyLifeInSec, IkePolicyAuthenticationMethod;
IPSEC_IKEDB_TABLE 0 = 123456789, 1, 2, 0, 2, 2, 1, 28800, 0;
[\IPSEC_IKEDB_TABLE]
In the example above, a single IKE peer is configured and a Pre-shared key authentication
is selected. Its pre-shared key is 123456789. Two security proposals are configured:
DES/SHA1/786DH and 3DES/SHA1/1024DH.
5.10
Configuring the Management Settings
The 'Management Settings' screen is used to configure the gateway's management
parameters.
To configure the Management Settings parameters, take these 4
steps:
1.
Open the 'Management Settings' screen (Advanced Configuration menu >
Management Settings).
Version 5.2
Figure 5-56: Management Settings Screen
243
5. Web-based Management
September 2007