SIP User's Manual
3.2.3
Switching Between Modules
The device can house up to two modules, as discussed in previous sections. Since each
module is a standalone gateway, the 'Home' page displays only one of the modules to
which you are connected. However, you can easily switch to the second module, by having
the Web browser connect to the IP address of the other module.
To switch modules:
1.
In the 'Home' page, click anywhere on the module to which you want to switch, as
shown below:
Figure 3-31: Click Module to which you want to Switch
A confirmation message box appears requesting you to confirm switching of modules.
Figure 3-32: Confirmation Message Box for Switching Modules
2.
Click OK
switched module appears.
3.
Enter the login user name and password, and then click
Version 5.8
; the 'Enter Network Password' screen pertaining to the Web interface of the
OK .
55
3. Web-Based Management
October 2009