Editing A Scenario - AudioCodes Mediant 2000 User Manual

SIP User's Manual

In an opened Scenario Step (i.e., page appears in the Work pane), use the following
navigation buttons:
•
•
Note:
3.1.8.3

Editing a Scenario

You can modify a Scenario anytime by adding or removing Steps (i.e., pages) or
parameters, and changing the Scenario name and the Steps' names.
Note:

To edit a Scenario:
1. On the Navigation bar, click the Scenarios
you to confirm Scenario loading.
2. Click OK
3. Click the
'Scenario Name' and 'Step Name' fields appear.
4. You can perform the following edit operations:
•
Add Steps:
a.
b.
c.
d.
•
Add or Remove Parameters:
a.
b.
c.
Version 5.8
Next: opens the next Step listed in the Scenario.
Previous : opens the previous Step listed in the Scenario.
If you reset the device while in Scenario mode, after the device resets, you
are returned once again to the Scenario mode.
Only users with access level of 'Security Administrator' can edit a Scenario.
; the Scenario appears with its Steps in the Navigation tree.
Edit Scenario button located at the bottom of the Navigation pane; the
On the Navigation bar, select the desired tab (i.e.,
Management ); the tab's menu appears in the Navigation tree.
In the Navigation tree, navigate to the desired page item; the corresponding
page opens in the Work pane.
In the page, select the required parameter(s) by marking the corresponding
check box(es).
Click Next .
In the Navigation tree, select the required Step; the corresponding page
opens in the Work pane.
To add parameters, select the check boxes corresponding to the desired
parameters; to remove parameters, clear the check boxes corresponding to
the parameters that you want removed.
Click Next.
tab; a message box appears, requesting
41
3. Web-Based Management
Configuration or
October 2009