AudioCodes Mediant 2000 User Manual page 351

SIP User's Manual
Parameter
Web/EMS: Use Display Name as
Source Number
[UseDisplayNameAsSourceNu
mber]
Web: Use Routing Table for Host
Names and Profiles
EMS: Use Routing Table For Host
Names
[AlwaysUseRouteTable]
Web/EMS: Tel to IP Routing
Mode
[RouteModeTel2IP]
Version 5.8
Determines the use of Source Number and Display Name for IP-
to-Tel calls.

[0] No = If IP Display Name is received, the IP Source
Number is used as the Tel Source Number and the IP
Display Name is used as the Tel Display Name. If no Display
Name is received from IP, the Tel Display Name remains
empty (default).

[1] Yes = If an IP Display Name is received, it is used as the
Tel Source Number and also as the Tel Display Name, and
Presentation is set to Allowed (0). If no Display Name is
received from IP, the IP Source Number is used as the Tel
Source Number and Presentation is set to Restricted (1).
For example: When 'from: 100 <sip:200@201.202.203.204>' is
received, the outgoing Source Number and Display Name are
set to '100' and the Presentation is set to Allowed (0).
When 'from: <sip:100@101.102.103.104>' is received, the
outgoing Source Number is set to '100' and the Presentation is
set to Restricted (1).
Determines whether to use the device's Routing table to obtain
the URI host name and optionally, an IP profile (per call), even if
a Proxy server is used.

[0] Disable = Don't use internal routing table (default).

[1] Enable = Use the 'Tel to IP Routing' table (or 'Outbound
IP Routing' table if EnableSBC is set to 1).
Notes:

This parameter appears only if the 'Use Default Proxy'
parameter is enabled.

The domain name is used instead of a Proxy name or IP
address in the INVITE SIP URI.
For a description of this parameter, refer to ''
to IP Routing Table'' on page
351
6. Configuration Parameters Reference
Description
Configuring the Tel
138 .
October 2009