Figure 3-94: Snmp Community Strings - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Parameter
Trap Enable
[SNMPManagerTrapSendingEnable_x]
3.4.1.1.2 Configuring the SNMP Community Strings
The 'SNMP Community String' page allows you to configure up to five read-only and up to
five read-write SNMP community strings, and to configure the community string that is used
for sending traps. For detailed information on SNMP community strings, refer to the Product
Reference Manual.

To configure the SNMP community strings:
1. Access the 'Management Settings' page, as described in ''Configuring the
Management Settings''
2. In the 'SNMP Community String' field, click the right-pointing arrow
'SNMP Community String' page appears.
3. Configure the SNMP community strings parameters according to the table below.
4. Click the Submit
5. To save the changes to flash memory, refer to ''
Note:
Version 5.8
Activates or de-activates the sending of traps to the
corresponding SNMP Manager.


on page
Figure 3-94: SNMP Community Strings Page
button to save your changes.
To delete a community string, select the Delete check box corresponding to
the community string that you want to delete, and then click Submit.
Description
[0] Disable = Sending is disabled.
[1] Enable = Sending is enabled (default).
164 .
Saving Configuration''
167
3. Web-Based Management
button; the
on page 173
October 2009
.