Figure 3-102: Software Upgrade Key Status - AudioCodes Mediant 2000 User Manual

SIP User's Manual
The procedure below describes how to load a Software Upgrade Key to the device using
the Web interface.

To load a Software Upgrade Key:
1. Open the 'Software Upgrade Key Status' page (Management tab > Software Update
menu > Software Upgrade Key
2. Backup your current Software Upgrade Key as a precaution so that you can re-load
this backup key to restore the device's original capabilities if the new key doesn't
comply with your requirements:
a. In the 'Current Key' field, copy the string of text and paste it in any standard text
file.
b. Save the text file to a folder on your PC with a name of your choosing.
3. Open the new Software Upgrade Key file and ensure that the first line displays
'[LicenseKeys]' and that it contains one or more lines in the following format:
S/N<serial number of the first or second module
For example: S/N370604 = jCx6r5tovCIKaBBbhPtT53Yj...
One S/N must match the serial number of your device. The device's serial number can
be viewed in the 'Device Information' page (refer to ''Viewing Device Information''
page 186
4. Follow one of the following procedures, depending on whether you are loading a single
or multiple key S/N lines:
•
Single key S/N line:
a.
b.
c.
Version 5.8
Figure 3-102: Software Upgrade Key Status Page
).
Open the Software Upgrade Key text file (using, for example, Microsoft
Notepad).
Select and copy the key string of the device's S/N and paste it into the field
'Add a Software Upgrade Key'.
Click the Add Key button.
page item).
> = <long Software Upgrade Key>
177
3. Web-Based Management

October 2009
on