AudioCodes Mediant 2000 User Manual page 354

Parameter
Web/EMS: Filter Calls to IP
[FilterCalls2IP]
[IP2TelTaggingDialPlanIndex]
[EnableETSIDiversion]
SIP User's Manual
Enables filtering of Tel-to-IP calls when a Proxy is used (i.e.,
IsProxyUsed parameter is set to 1 - refer to ''
and Registration Parameters''

[0] Don't Filter = device doesn't filter calls when using a
Proxy. (default)

[1] Filter = Filtering is enabled.
When this parameter is enabled and a Proxy is used, the device
first checks the 'Tel-to-IP Routing' table
table before making a call through the Proxy. If the number is
not allowed (i.e., number isn't listed in the table or a call
restriction routing rule of IP address 0.0.0.0 is applied), the call
is released.
Note: When no Proxy is used, this parameter must be disabled
and filtering is according to the 'Tel-to-IP Routing' table (or
'Outbound IP Routing' table).
Determines the Dial Plan index in the external Dial Plan file
(*.dat) in which string labels ("tags") are defined for tagging
incoming IP-to-Tel calls. The special "tag" is added as a prefix to
the called party number, and then the 'IP-to-
Routing' table uses this "tag" instead of the original prefix.
Manipulation is then performed (after routing) in the
Manipulation table, which strips the "tag" characters before
sending the call to the endpoint.
The valid values are 0 to 7, where 0 denotes PLAN1, 1 denotes
PLAN2, and so on. The default is -1 (i.e., no dial plan file used).
The routing label can be up to 9 (text) characters.
Notes:

The routing must be configured to be performed before
manipulation.

For a detailed description of this feature, refer to ''Dial Plan
Prefix Tags for IP-to-Tel Routing''
Defines the method in which the Redirect Number is passed
toward the Tel side.

[0] = Q.931 Redirecting Number Information Element (IE)
(default)

[1] = ETSI DivertingLegInformation2 in a Facility IE
354
Description
Configuring Proxy
on page 101 ).
or 'Outbound IP Routing'
Trunk
on page 403
Document #: LTRT-68809
Mediant 2000
Group
.