Parameter
DSP Template Number
[DSPVersionTemplateNumber]
DSP Resources Percentage
Notes:
3.3.2.7
Configuring Media Security
The 'Media Security' page allows you to configure media security. For a detailed description
of the parameters appearing on this page, refer to ''Configuration Parameters Reference''
on page 223.
To configure media security:
1.
Open the 'Media Security' page (Configuration tab > Media Settings menu > Media
Security
2.
Configure the parameters as required.
3.
Click the Submit
4.
To save the changes to flash memory, refer to ''
SIP User's Manual
Table 3-9: DSP Templates Parameters
Determines the DSP template to use on the device. Each DSP
template supports specific coders, channel capacity, and
features.
The default is DSP template 0.
Resource percentage used for the specified template.
•
For the list of supported DSP templates, refer to the device's Release
Notes
.
•
If you delete all the table entries, the device uses the default DSP
template.
•
For an explanation on configuring the Web interface's tables, refer to
''Working with Tables''
page item).
Figure 3-46: Media Security Page
button to save your changes.
Description
on page
34
.
Saving Configuration''
72
Mediant 2000
on page
173
.
Document #: LTRT-68809