2.
In the 'SNMP Trusted Managers' field, click the right-pointing arrow
'SNMP Trusted Managers' page appears.
3.
Select the check box corresponding to the SNMP Trusted Manager that you want to
enable and for whom you want to define an IP address.
4.
Define an IP address in dotted-decimal notation.
5.
Click the Submit
6.
To save the changes, refer to ''
3.4.1.2
Configuring the Regional Settings
The 'Regional Settings' page allows you to define and view the device's internal date and
time.
To configure the device's date and time:
1.
Open the 'Regional Settings' page (Management tab > Management Configuration
menu > Regional Settings
2.
Enter the current date and time in the geographical location in which the device is
installed.
3.
Click the Submit button; the date and time are automatically updated.
Notes:
SIP User's Manual
Figure 3-96: SNMP Trusted Managers
button to apply your changes.
Saving Configuration''
page item).
Figure 3-97: Regional Settings Page
•
If the device is configured to obtain the date and time from an SNTP
server (refer to ''Configuring the Application Settings''
fields on this page are read-only and cannot be modified.
•
For an explanation on SNTP, refer to ''Simple Network Time Protocol
Support''
on page
451
•
After performing a hardware reset, the date and time are returned to their
defaults and therefore, should be updated.
on page
.
170
Mediant 2000
button; the
173
.
on page
61
), the
Document #: LTRT-68809