Table 3-10: Cas State Machine Parameters Description - AudioCodes Mediant 2000 User Manual

SIP User's Manual
4. Once you have completed the configuration, activate the trunk if required in the 'Trunk
Settings' page, by clicking the trunk number in the 'Related Trunks' field, and in the
'Trunk Settings' page, select the required Trunk number icon, and then click Apply
Trunk Settings
5. Click Submit
6. Reset the device (refer to ''
Notes:

Table 3-10: CAS State Machine Parameters Description

Parameter
Generate Digit On Time
[CasStateMachineGenerateDigitOnTime]
Generate Inter Digit Time
[CasStateMachineGenerateInterDigitTime]
DTMF Max Detection Time
[CasStateMachineDTMFMaxOnDetectionTime]
Version 5.8
.
.
Resetting the Device''
•
It's strongly recommended that you don't modify the default values unless
you fully understand the implications of the changes and know the default
values. Every change affects the configuration of the state machine
parameters and the call process related to the trunk you are using with
this state machine.
•
You can modify CAS state machine parameters only if the following
conditions are met:
1) Trunks are inactive (stopped), i.e., the 'Related Trunks' field displays
the trunk number in green.
2) State machine is not in use or is in reset, or when it is not related to
any trunk. If it is related to a trunk, you must delete the trunk or de-
activate (Stop ) the trunk.
•
Field values displaying '-1' indicate CAS default values. In other words,
CAS state machine values are used.
•
The modification of the CAS state machine occurs at the CAS application
initialization only for non-default values (-1).
•
For a detailed description of the CAS Protocol table, refer to the Product
Reference Manual .
on page
Generates digit on-time (in msec).
The value must be a positive value. The
default value is -1.
Generates digit off-time (in msec).
The value must be a positive value. The
default value is -1.
Detects digit maximum on time (according
to DSP detection information event) in msec
units.
The value must be a positive value. The
default value is -1.
77
3. Web-Based Management
171 ).
Description
October 2009