Figure 3-33: Ip Settings Page; Figure 3-34: Confirmation Message For Accessing The Multiple Interface Table; Figure 3-35: Multiple Interface Table Page - AudioCodes Mediant 2000 User Manual


To configure the multiple IP interface table:
1. Open the 'IP Settings' page (Configuration tab > Network Settings menu > IP
Settings)
2. Under the 'Multiple Interface Settings' group, click the Multiple Interface Table
button; a confirmation message box appears:

Figure 3-34: Confirmation Message for Accessing the Multiple Interface Table

3. Click OK to confirm; the 'Multiple Interface Table' page appears:
4. In the 'Add' field, enter the desired index number for the new interface, and then click
Add ; the index row is added to the table.
5. Configure the interface according to the table below.
6. Click the Apply button; the interface is added to the table and the Done
appears.
7. Click Done
with another interface in the table or it does not adhere to the other rules for adding
interfaces), a message is displayed to inform you and you must redefine your
interfaces accordingly.
8. To save the changes to flash memory, refer to ''
SIP User's Manual
.

Figure 3-33: IP Settings Page

Figure 3-35: Multiple Interface Table Page
to validate the interface. If the interface is not a valid (e.g., if it overlaps
Saving Configuration''
58
Mediant 2000
button
on page 173 .
Document #: LTRT-68809