Routing Tables; Figure 3-77: Routing General Parameters - AudioCodes Mediant 2000 User Manual

SIP User's Manual
3.3.7.9

Routing Tables

The Routing Tables submenu allows you to configure call routing rules. This submenu
includes the following page items:

Routing General Parameters (refer to ''Configuring Routing General Parameters''
page 137

Tel to IP Routing (refer to ''Configuring the Tel to IP Routing Table''

Outbound IP Routing (refer to "Configuring the Outbound IP Routing Table" on page
142)

IP to Trunk Group Routing (refer to ''
page 145

Inbound IP Routing (refer to "Configuring the Inbound IP Routing Table" on page 148)

Internal DNS Table (refer to ''

Internal SRV Table (refer to ''Configuring the Internal SRV Table''

Release Cause Mapping (refer to "Configuring Release Cause Mapping" on page 151)

Alternative Routing (refer to ''
153 )
3.3.7.9.1 Configuring General Routing Parameters
The 'Routing General Parameters' page allows you to configure the general routing
parameters. For a description of these parameters, refer to ''Configuration Parameters
Reference'' on page 223.

To configure the general routing parameters:
1. Open the 'Routing General Parameters' page (Configuration tab > Protocol
Configuration menu > Routing Tables submenu > Routing General Parameters
page item).
Version 5.8
)
)
Configuring the Internal DNS Table''
Configuring Reasons for Alternative Routing''
Figure 3-77: Routing General Parameters Page
Configuring the IP to Trunk Group Routing''
137
3. Web-Based Management
on page 138 )
on
on page 150 )
on page 151 )
on page
October 2009
on