Figure 3-75: Source Phone Number Manipulation Table For Tel-To-Ip Calls; Table 3-24: Number Manipulation Parameters Description - AudioCodes Mediant 2000 User Manual

SIP User's Manual

To configure the Number Manipulation tables:
1. Open the required 'Number Manipulation' page (Configuration tab > Protocol
Configuration menu > Manipulation Tables submenu > Dest Number IP->Tel, Dest
Number Tel->IP, Source Number IP->Tel, or Source Number Tel->IP page item);
the relevant Manipulation table page is displayed (e.g., 'Source Phone Number
Manipulation Table for Tel

Figure 3-75: Source Phone Number Manipulation Table for Tel-to-IP Calls

The figure above shows an example of the use of manipulation rules for Tel-to-IP
source phone number manipulation:
•
Index 1:
number prefix 201 (e.g., 20155), and from source IP Group ID 2, the source
number is changed to, for example, 97120155.
•
Index 2:
to 587623.
•
Index 3:
it is changed to 20018.
•
Index 4:
3122), it is changed to 2312.
•
Index 5:
source number prefix 2001, it is changed to 3146.
2. From the 'Table Index' drop-down list, select the range of entries that you want to edit.
3. Configure the Number Manipulation table according to the table below.
4. Click the Submit
5. To save the changes to flash memory, refer to ''

Table 3-24: Number Manipulation Parameters Description

Parameter
Source Trunk Group
[_SrcTrunkGroupID]
Version 5.8
IP Calls' page).
When the destination number has the prefix 03 (e.g., 035000), source
When the source number has prefix 1001 (e.g., 1001876), it is changed
When the source number has prefix 123451001 (e.g., 1234510012001),
When the source number has prefix from 30 to 40 and a digit (e.g.,
When the destination number has the prefix 6, 7, or 8 (e.g., 85262146),
button to save your changes.
The source Trunk Group (1-99) for Tel-to-IP calls. To denote any
Trunk Group, leave this field empty.
Notes:

The value -1 indicates that it is ignored in the rule.

This parameter is available only in the 'Source Phone Number
Manipulation Table for Tel -> IP Calls' and 'Destination Phone
Number Manipulation Table for Tel -> IP Calls' pages.

For IP-to-IP call routing, this parameter is not required (i.e., leave
the field empty).
131
3. Web-Based Management
Saving Configuration''
Description
on page 173 .
October 2009