Viewing Trunk Settings; Switching Between Modules; Figure 3-25: Text Box For Port Name; Figure 3-27: Click Module To Which You Want To Switch - AudioCodes Mediant 2000 User Manual

SIP User's Manual
2. From the shortcut menu, choose Update Port Info
3. Type a brief description for the port, and then click Apply Port Info .
3.2.2

Viewing Trunk Settings

The 'Home' page allows you to view the settings of a selected port in the 'Trunk Settings'
page. Accessing this page from the Home page provides an alternative to accessing it from
the Advanced Configuration menu (refer to ''Configuring the Trunk Settings''

To view port settings:
1. On the 'Home' page, click a desired trunk port LED (refer to Accessing the Home
Page); a shortcut menu appears.
2. From the shortcut menu, choose Port Settings ; the 'Trunk Settings' screen opens.
3.2.3

Switching Between Modules

The device can house up to two modules, as discussed in previous sections. Since each
module is a standalone gateway, the 'Home' page displays only one of the modules to
which you are connected. However, you can easily switch to the second module, by having
the Web browser connect to the IP address of the other module.

To switch modules:
1. In the 'Home' page, click anywhere on the module to which you want to switch, as
shown below:
Figure 3-29: Click Module to which you want to Switch
Version 6.0
Figure 3-28: Text Box for Port Name
49
3. Web-Based Management
; a text box appears.
on page 71 ).
March 2010