AudioCodes Mediant 2000 User Manual page 213

SIP User's Manual
5. Select the Registration
a. Configure 'Is Register Needed' field:
♦
♦
b. Click Apply
6. On the Tab bar, click
a. Click the
'Phones' screen is displayed.
b. Double-click each field to enter values.
c. Right-click the new entry, and then select
d. Click
Note:
7. If a Proxy Server is not implemented, map outgoing telephone calls to IP addresses.
On the Tab bar, Routing
8. Select the
a. Click the
Routing table is displayed.
b. Double-click each field to enter values.
c. Right-click the new entry and select Unlock Rows
d. Click
Version 5.8
tab.
No = the device doesn't register to a Proxy/Registrar server (default).
Yes = the device registers to a Proxy/Registrar server at power up and every
user-defined interval ('Registration Time' parameter).
and close the active window.
End Points
button to add a new entry, and then click Yes
Apply and close the active window.
For T1 ISDN spans, configure 1-23 (and not 1-24) for B-channels. Channel
24 is a signaling ISDN channel.
; the 'SIP Routing' frame is displayed.
Tel to IP tab.
button to add a new entry, and then click Yes
Apply and close the active window.
5. Element Management System (EMS)
; the 'SIP EndPoints' frame is displayed.
Unlock Rows.
.
213
to confirm; the
to confirm; the Tel to IP
October 2009