Loading A Scenario To The Device - AudioCodes Mediant 2000 User Manual

SIP User's Manual
3. Click the Get Scenario File
4. Click Save
to save the Scenario file. When the file is successfully downloaded to your PC, the
'Download Complete' window appears.
5. Click Close to close the 'Download Complete' window.
3.1.8.5

Loading a Scenario to the Device

Instead of creating a Scenario, you can load a Scenario file (data file) from your PC to the
device.

To load a Scenario to the device:
1. On the Navigation bar, click the Scenarios
tree.
2. Click the
the 'Scenario File' page appears (refer to ''Saving a Scenario to a PC''
3. Click the Browse
4. Click the
Notes:
Version 5.8
button; the 'File Download' window appears.
, and then in the 'Save As' window navigate to the folder to where you want
Get/Send Scenario File button (located at the bottom of the Navigation tree);
button, and then navigate to the Scenario file stored on your PC.
Send File button.
•
You can only load a Scenario file to a device that has an identical
hardware configuration setup to the device in which it was created. For
example, if the Scenario was created in a device with FXS interfaces, the
Scenario cannot be loaded to a device that does not have FXS
interfaces.
•
The loaded Scenario replaces any existing Scenario.
•
You can also load a Scenario file using BootP, by loading an ini file that
contains the ini file parameter ScenarioFileName (refer to ''Web and
Telnet Parameters''
in the same folder as the ini file. For a detailed description on BootP, refer
to the Product Reference Manual .
tab; the Scenario appears in the Navigation
on page 237 ). The Scenario dat file must be located
43
3. Web-Based Management
on page 42
October 2009
).