Viewing Trunk Settings; Switching Between Modules; Figure 3-28: Entering The Port Name; Figure 3-29: Click Module To Which You Want To Switch - AudioCodes Mediant 2000 User Manual

From the shortcut menu, choose Update Port Info; a text box appears.
2.
Type a brief description for the port, and then click Apply Port Info.
3.
3.3.8.2

Viewing Trunk Settings

The 'Home' page allows you to view the settings of a selected port in the 'Trunk Settings'
screen. Accessing this screen from the Home page provides an alternative to accessing it
from the Advanced Configuration menu (refer to ''Configuring the Trunk Settings'' on page
82).
To view port settings, take these 2 steps:
On the 'Home' page, click a desired trunk port LED on the TP-1610 (labeled as items
1.
#3 and #5 in the figure in Accessing the Home Page); a shortcut menu appears.
From the shortcut menu, choose Port Settings; the 'Trunk Settings' screen opens.
2.
3.3.8.3

Switching Between Modules

The device can house up to two modules, as discussed in previous sections. Since each
module is a standalone gateway, the 'Home' page displays only one of the modules to
which you are connected. However, you can easily switch to the second module, by having
the Web browser connect to the IP address of the other module.
To switch modules, take these 3 steps:
In the 'Home' page, click anywhere on the module to which you want to switch, as
1.
shown below:

Figure 3-29: Click Module to which you want to Switch

A confirmation message box appears requesting you to confirm switching of modules.
SIP User's Manual

Figure 3-28: Entering the Port Name

48
Mediant 2000
Document #: LTRT-68808