Viewing Ethernet Port Information; Viewing Active Ip Interfaces; Figure 3-109: Ethernet Port Information; Figure 3-110: Ethernet Port Information - AudioCodes Mediant 2000 User Manual

SIP User's Manual
3.5.1.2

Viewing Ethernet Port Information

The 'Ethernet Port Information' page displays read-only information on the Ethernet
connection used by the device. This includes indicating the active port, duplex mode, and
speed. You can also access this page from the 'Home' page (refer to ''Using the Home
Page'' on page 52).
For detailed information on the Ethernet redundancy scheme, refer to "Ethernet Interface
Redundancy" on page 448. For detailed information on the Ethernet interface configuration,
refer to ''Ethernet Interface Configuration'' on page 447.

To view Ethernet port information:

Open the 'Ethernet Port Information' page (Status & Diagnostics tab > Status &
Diagnostics menu > Ethernet Port Information
Parameter
Active Port
Port Duplex Mode
Port Speed
3.5.1.3

Viewing Active IP Interfaces

The 'IP Interface Status' page displays the device's active IP interfaces, which are
configured in the 'Multiple Interface Table' page (refer to ''Configuring the Multiple Interface
Table'' on page 56).

To view the 'Active IP Interfaces' page:

Open the 'IP Interface Status' page (Status & Diagnostics tab > Status &
Diagnostics menu > IP Interface Status
Version 5.8
Figure 3-109: Ethernet Port Information Page

Table 3-37: Ethernet Port Information Parameters

Displays the active Ethernet port (1 or 2).
Displays the Duplex mode of the Ethernet port.
Displays the speed (in Mbps) of the Ethernet port.
Figure 3-110: Ethernet Port Information Page
page item).
Description
page item).
185
3. Web-Based Management
October 2009