AudioCodes Mediant 2000 User Manual page 289

SIP User's Manual
Parameter
Web: Set Out-Of-Service On
Registration Failure
[OOSOnRegistrationFail]
Version 5.8
Enables setting a , trunk,
endpoints) to out-of-service if registration fails.

[0] Disable = Disabled (default).

[1] Enable = Enabled.
If the registration is per Endpoint (i.e., AuthenticationMode is
set to 0) or Account (refer to ''
Settings'' on page 157 ) and a specific endpoint/Account
registration fails (SIP 4xx or no response), then that endpoint
is set to out-of-service until a success response is received in
a subsequent registration request. When the registration is per
the entire device (i.e., AuthenticationMode is set to 1) and
registration fails, all endpoints are set to out-of-service. If all
the Accounts of a specific Trunk Group fail registration and if
the Trunk Group comprises a complete trunk, then the entire
trunk is set to out-of-service.
289
6. Configuration Parameters Reference
Description
or the entire device (i.e., all
Configuring the Trunk Group
October 2009