AudioCodes Mediant 2000 User Manual page 308

Parameter
Web: SAS IP-to-IP Routing Table
[IP2IPRouting]
SIP User's Manual
This ini file table parameter configures the IP-to-IP Routing table
for SAS routing when in Emergency SAS mode. The format of
this parameter is as follows:
[IP2IPRouting]
FORMAT IP2IPRouting_Index = IP2IPRouting_SrcIPGroupID,
IP2IPRouting_SrcUsernamePrefix, IP2IPRouting_SrcHost,
IP2IPRouting_DestUsernamePrefix, IP2IPRouting_DestHost,
IP2IPRouting_DestType, IP2IPRouting_DestIPGroupID,
IP2IPRouting_DestSRDID, IP2IPRouting_DestAddress,
IP2IPRouting_DestPort, IP2IPRouting_DestTransportType,
IP2IPRouting_AltRouteOptions
[\IP2IPRouting]
For example:
IP2IPRouting 1 = -1, *, *, *, *, 0, -1, -1, , 0, -1, 0;
Notes:

This table can include up to 120 indices (where 0 is the first
index).

This table is applicable only when the SAS application is
enabled and in Emergency mode.

The parameters SrcIPGroupID, DestSRDID, and
AltRouteOptions are not applicable.

For a detailed description of the individual parameters in this
table and for configuring this table using the Web interface,
refer to '' Configuring the IP2IP Routing Table (SAS)''
126 .

For a description on configuring ini file table parameters, refer
to ''Structure of ini File Table Parameters''
308
Description
;
on page
Document #: LTRT-68809
Mediant 2000
on page
199 .