Mlpp Parameters; Table 6-38: Mlpp Parameters - AudioCodes Mediant 2000 User Manual

Parameter
EMS: Blind Transfer Disconnect
Timeout
[BlindTransferDisconnectTimeout]
6.8.6

MLPP Parameters

The Multilevel Precedence and Preemption (MLPP) parameters are described in the table
below.
Parameter
Web/EMS: Call Priority Mode
[CallPriorityMode]
Web: MLPP Default Namespace
EMS: Default Name Space
[MLPPDefaultNamespace]
Web/EMS: Default Call Priority
[SIPDefaultCallPriority]
SIP User's Manual
Defines the duration (in milliseconds) for which the device
waits for a disconnection from the Tel side after the Blind
Transfer Code (KeyBlindTransfer) has been identified. When
this timer expires, a SIP REFER message is sent toward the
IP side. If this parameter is set to 0, the REFER message is
immediately sent.
The valid range is 0 to 1,000,000. The default is 0.

Table 6-38: MLPP Parameters

Enables MLPP Priority Call handling.

[0] Disable = Disable (default).

[1] MLPP = Priority Calls handling is enabled.
Determines the Namespace used for MLPP calls received
from the ISDN side and destined for the Application server.
The Namespace value is not present in the Precedence IE of
the PRI SETUP message. Therefore, the value is used in the
Resource-Priority header of the outgoing SIP INVITE request.

[1] DSN = DSN (default)

[2] DOD = DOD

[3] DRSN = DRSN
Defines the default call priority for MLPP calls.

[0] 0 = ROUTINE (default)

[2] 2 = PRIORITY

[4] 4 = IMMEDIATE

[6] 6 = FLASH

[8] 8 = FLASH-OVERRIDE

[9] 9 = FLASH-OVERRIDE-OVERRIDE
If the incoming SIP INVITE request doesn't contain a valid
priority value in the SIP Resource-Priority header, the default
value is used in the Precedence IE (after translation to the
relevant ISDN Precedence value) of the outgoing PRI SETUP
message.
If the incoming PRI SETUP message doesn't contain a valid
Precedence Level value, the default value is used in the
Resource-Priority header of the outgoing SIP INVITE request.
In this scenario, the character string is sent without translation
to a numerical value.
302
Description
Description
Document #: LTRT-68809
Mediant 2000