Figure 3-95: Snmp V3 Setting; Table 3-34: Snmp Community Strings Parameters Description - AudioCodes Mediant 2000 User Manual

Table 3-34: SNMP Community Strings Parameters Description

Parameter
Community String
Trap Community String
[SNMPTrapCommunityString]
3.4.1.1.3 Configuring SNMP V3 Users
The 'SNMP V3 Settings' page allows you to configure authentication and privacy for up to
10 SNMP v3 users.

To configure the SNMP v3 users:
1. Access the 'Management Settings' page, as described in ''Configuring the
Management Settings''
2. In the 'SNMP V3 Table' field, click the right-pointing arrow
Settings' page appears.
3. To add an SNMP v3 user, in the 'Add' field, enter the desired row index, and then click
Add . A new row appears.
4. Configure the SNMP V3 Setting parameters according to the table below.
5. Click the Apply
6. To save the changes, refer to ''
Notes:
SIP User's Manual

Read Only [SNMPReadOnlyCommunityString_x]:
read-only community strings (up to 19 characters each). The
default string is 'public'.

Read / Write
five read / write community strings (up to 19 characters each).
The default string is 'private'.
Community string used in traps (up to 19 characters).
The default string is 'trapuser'.
on page
Figure 3-95: SNMP V3 Setting Page
button to save your changes.
Saving Configuration''
•
For a description of the web interface's table command buttons (e.g.,
Duplicate and Delete), refer to ''Working with Tables''
•
You can also configure SNMP v3 users using the ini file table parameter
SNMPUsers (refer to ''SNMP Parameters''
Description
[SNMPReadWriteCommunityString_x]:
164 .
on page
168
Mediant 2000
Up to five
Up to
button; the 'SNMP V3
173 .
on page 34 .
on page 257 ).
Document #: LTRT-68809