3.1.8.2
Accessing a Scenario
Once you have created the Scenario, you can access it at anytime by following the
procedure below:
To access the Scenario:
1.
On the Navigation bar, select the Scenario
you to confirm the loading of the Scenario.
2.
Click OK
example figure below:
When you select a Scenario Step, the corresponding page is displayed in the Work pane. In
each page, the available parameters are indicated by a dark-blue background; the
unavailable parameters are indicated by a gray or light-blue background.
To navigate between Scenario Steps, you can perform one of the following:
In the Navigation tree, click the required Scenario Step.
SIP User's Manual
Figure 3-16: Scenario Loading Message Box
; the Scenario and its Steps appear in the Navigation tree, as shown in the
Figure 3-17: Scenario Example
tab; a message box appears, requesting
40
Mediant 2000
Document #: LTRT-68809