AudioCodes Mediant 2000 User Manual page 133

SIP User's Manual
Parameter
Web: NPI
EMS: Number Plan
[_NumberPlan]
Web: TON
EMS: Number Type
[_NumberType]
Web: Presentation
EMS: Is Presentation
Restricted
[_IsPresentationRestricted]
Version 5.8
The Numbering Plan Indicator (NPI) assigned to this entry.

[0] Unknown (default)

[9] Private

[1] E.164 Public

[-1] Not Configured = value received from PSTN/IP is used
Notes:

This parameter is applicable only to Number Manipulation tables
for IP-to-Tel calls.

For a detailed list of the available NPI/TON values, refer to
"Numbering Plans and Type of Number"
The Type of Number (TON) assigned to this entry.

If you selected 'Unknown' for the NPI, you can select Unknown
[0].

If you selected 'Private' for the NPI, you can select Unknown [0],
Level 2 Regional [1], Level 1 Regional [2], PISN Specific [3] or
Level 0 Regional (Local) [4].

If you selected 'E.164 Public' for the NPI, you can select Unknown
[0], International [1], National [2], Network Specific [3], Subscriber
[4] or Abbreviated [6].
Notes:

This parameter is applicable only to Number Manipulation tables
for IP-to-Tel calls.

The default is 'Unknown'.
Determines whether Caller ID is permitted:

Not Configured = privacy is determined according to the Caller ID
table (refer to Configuring Caller Display Information).

Allowed = sends Caller ID information when a call is made using
these destination / source prefixes.

Restricted = restricts Caller ID information for these prefixes.
Notes:

Only applicable to Number Manipulation tables for source number
manipulation.

If 'Presentation' is set to 'Restricted' and 'Asserted Identity Mode'
is set to 'P-Asserted', the From header in the INVITE message
includes the following: From: 'anonymous' <sip:
anonymous@anonymous.invalid> and 'privacy: id' header.
133
3. Web-Based Management
Description
on page 135
October 2009