3.3.7.11 Configuring Digital Gateway Parameters
The 'Digital Gateway Parameters' page allows you to configure miscellaneous digital
parameters. For a description of these parameters, refer to ''Configuration Parameters
Reference'' on page 223.
To configure the digital gateway parameters:
1.
Open the 'Digital Gateway Parameters' page (Configuration tab > Protocol
Configuration menu > Digital Gateway submenu > Digital Gateway Parameters
page item).
2.
Configure the parameters as required.
3.
Click the Submit
4.
To save the changes to flash memory, refer to ''
SIP User's Manual
Figure 3-88: Digital Gateway Parameters Page
button to save your changes.
160
Saving Configuration''
on page
Document #: LTRT-68809
Mediant 2000
173
.