Proxy, Registration And Authentication Parameters; Table 6-30: Proxy, Registration And Authentication Sip Parameters - AudioCodes Mediant 2000 User Manual

Media gateway
Hide thumbs Also See for Mediant 2000:
Table of Contents

Advertisement

6.7.2

Proxy, Registration and Authentication Parameters

The proxy server, registration and authentication SIP parameters are described in the table
below.

Table 6-30: Proxy, Registration and Authentication SIP Parameters

Parameter
Web: Account Table
EMS: Account
[Account]
Proxy Registration Parameters
Web: Use Default Proxy
EMS: Proxy Used
[IsProxyUsed]
SIP User's Manual
This
ini file table parameter configures the Account table for
registering and/or authenticating (digest) Trunk Groups or IP
Groups
(e.g., an IP-PBX) to a Serving IP Group (e.g., an
Internet Telephony Service Provider - ITSP). The format of this
parameter is as follows:
[Account]
FORMAT Account_Index = Account_
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password,
Account_HostName, Account_Register,
Account_ContactUser, Account_ApplicationType
[\Account]
For example:
Account 1 = 1, -1, 1, user, 1234, acl, 1, ITSP1;
Notes:
This table can include up to 10 indices (where 1 is the first
index).
The parameter Account_ApplicationType is not applicable.
You can define multiple table indices with the same
ServedTrunkGroup but different ServingIPGroups,
username, password, HostName, and ContactUser. This
provides the capability for registering the same
Group or IP Group
to several ITSP's (i.e., Serving IP
Groups).
For a detailed description of this table's parameters and for
configuring this table using the Web interface, refer to
''
Configuring the Account Table''
For an explanation on using ini file table parameters, refer
to ''Format of ini File Table Parameters''
Enables the use of a SIP Proxy server.
[0]
No = Proxy isn't used - the internal routing table is used
instead (default).
[1]
Yes = Proxy is used. Parameters relevant to Proxy
configuration are displayed.
If you are using a Proxy server, enter the IP address of the
Proxy server in the 'Proxy Sets table' (refer to ''
Proxy Sets Table''
on page
server, you must configure the device's 'Tel to IP Routing'
table (described in ''Configuring the Tel to IP Routing Table''
on page
138
).
280
Description
ServedTrunkGroup,
on page
111
on page
Configuring the
103
). If you are not using a Proxy
Document #: LTRT-68809
Mediant 2000
;
Trunk
.
199
.

Advertisement

Table of Contents
loading

Table of Contents