AudioCodes Mediant 2000 User Manual page 109

SIP User's Manual
Parameter
SIP Group Name
[IPGroup_SIPGroupName]
Contact User
[IPGroup_ContactUser]
IP Profile ID
[IPGroup_ProfileId]
Media Realm
[IPGroup_MediaRealm]
Gateway Parameters
Always Use Route Table
[IPGroup_AlwaysUseRouteTable]
Routing Mode
[IPGroup_RoutingMode]
Version 5.8
The request URI host name used in INVITE and REGISTER
messages that are sent to this IP Group, or the host name in
the From header of INVITE messages received from this IP
Group. If not specified, the value of the global parameter
ProxyName (refer to '' Configuring the Proxy and Registration
Parameters'' on page 101
The value range is a string of up to 49 characters. The default
is an empty field.
Note: If the IP Group is of type USER, this parameter is used
internally as a hostname in the request URI for PSTN-to-IP
initiated calls. For example, if an incoming call from the
device's T1 trunk is routed to a USER-type IP Group, the
device first forms the request URI
(<destination_number>@<SIP Group Name>), and then it
searches the user's internal database for a match.
Defines the user part for the From, To, and Contact headers of
SIP REGISTER messages, and the user part for the Contact
header of INVITE messages that are received from this IP
Group and forwarded by the device to another IP Group.
Notes:

This parameter is applicable only to USER-type IP Groups.

This parameter is overridden by the 'Contact User'
parameter in the 'Account' table (refer to ''
Account Table'' on page
The IP Profile that you want assigned to this IP Group.
The default is 0.
Note: IP Profiles are configured using the parameter IPProfile
(refer to ''Configuring P Profile Settings''
The Media Realm name associated with this IP Group.
Note: Media Realms are configured using the parameter
Media Realm table.
Determines the Request URI host name in outgoing INVITE
messages.

[0] Disable (default).

[1] Enable = The device uses the IP address (or domain
name) defined in the 'Tel to IP Routing' table (''Configuring
the Tel to IP Routing Table''
URI host name in outgoing INVITE messages, instead of
the value entered in the 'SIP Group Name' field.
Defines the routing mode for outgoing SIP INVITE messages.

[-1] Not Configured = The routing is according to the
selected Serving IP Group. If no Serving IP Group is
selected, the device routes the call according to the
'Outbound IP Routing' table (refer to "Configuring the
Outbound IP Routing Table" on page 142). (Default)

[0] Routing Table = The device routes the call according to
the 'Outbound IP Routing' table.
109
3. Web-Based Management
Description
) is used instead.
Configuring the
111 ).
on page
on page 138 ) as the Request
120 ).
October 2009